Perma Construction Aids Private Limited

Admixture For Hyper Plasticizing

DESCRIPTION

Perma Plast PC – 600 is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

ADVANTAGES

POLYCARBOXYLIC ETHER BASED ADMIXTURE

DESCRIPTION

Perma Plast PC – 405 is based on hyper plasticising synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

ADVANTAGES

POLY CARBOXYLIC ETHER BASED ADMIXTURE

Perma Plast PC – 401 C is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

1. Perma Plast PC – 401 C is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
2. Perma Plast PC – 401 C is recommended in hot weather concreting where workability retention over long periods is required.
3. Perma Plast PC – 401 C is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
4. Perma Plast PC – 401 C is also recommended where very high initial and ultimate strengths are expected.

ADVANTAGES
1. Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
2. Perma Plast PC – 401 C maintains the workability over long periods.
3. Perma Plast PC – 401 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
4. Perma Plast PC – 401 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.
5. Perma Plast PC – 401 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
6. Perma Plast PC -401 C enables production of dense impermeable and fair finish concrete.

Perma Pump Prime is a clear yellowish viscous liquid which is used for priming the concreting piping system in the concrete pump to ease the flow of concrete through the pipes easily without any friction with the pipes and to control segregation, bleed and the loss of slump due to heat generated by the friction.

PRIMARY USES

To lubricate the pump for pumping concrete, mortar, grout or any cementitious slurry.

ADVANTAGES

Perma Pump Prime helps in lubricating the pumping system without causing any adverse effect on the mix proportions. Priming with the cement slurry causes imbalance in the mix and priming with water causes increase in the water-cement ratios in the initial mixes pumped due to priming water entrapped in the recesses of the pumping system.

SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

Perma Plast Super 280 B is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde and ligno sulfonate blends.

PRIMARY USES

To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long overhauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

TYPICAL APPLICATIONS

For the production of high workability concrete where heavily congested reinforcement exist or poor access is available. To produce flowing self Compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete. It is based on naphthalene formaldehyde blends.

We offers Concrete Admixture Powder for construction in India. Perma concrete set powder is an accelerating powder admixture and powder admixture for concrete. The Concrete Setting Admixture Powder highly demanded in paver block manufacturing industry.

Concrete Set Powder used for : In fast setting of concretes and mortars , Concreting of pre-cast elements , Concreting and rendering at very low temperatures , In reducing rebound losses of sprayed mortars , In paver block industry , In casting yards of hollow and solid building blocks

Perma Concrete Set Powder is a accelerating admixture for use in non reinforced concrete and mortars. When admixed with concrete and mortar along with water Perma Concrete Set Powder accelerates the setting time of the concrete and mortar and helps in achieving high early strength. This product is of use in shot-creting and guniting and in concreting and rendering in cold climatic conditions. Paver industry can highly benefit from the use of this product as it helps in early de-moulding and early shifting of the paver blocks to site saving enormous amount of space utilized in conventional curing and its strength development.

Additional Information:

• Packaging Details: Perma Concrete Set Powder is available in 10 Kg & 25 Kg sacks.

High Quality Super Plasticiser

Perma Plast PC – 503 is a superior quality Super Plasticiser cum very high range water reducer based on high molecular weight Poly Carboxylic Copolymers.

PRIMARY USES