Perma Construction Aids Private Limited

Single Component Multi Purpose Building Adhesive Designed for Interior Applications

Our esteemed clients can avail from us an exclusive range of Flexible Crack filler. It is useful for filling all types of cracks, like plaster cracks, masonry cracks, structural cracks and cracks raised due to the earthquake. It is a single component material for filling the cracks in plastered surfaces because it has excellent bonding, ease of application, water resistance, aesthetic appearance & durability. Clients can avail these at industry leading prices.

We specialize in exporting and supplying an array of Poly sulphide Sealant. These products are used for sealing expansion joints, door, window surrounding joints & floor concrete to wall masonry separation joints etc. These sealants are considered as ideal for low modulus pitch and also appropriate for fronts like sealing horizontal movement joints in concrete paving associated with airfields, motorways, bridge decks, car parks, warehouse and industrial flooring.

We are the one of the leading manufacturer, supplier and exporter of a wide range of Acrylic Repair & Bonding Agent. These bonding agents are applied to repairing works of floors. Clients can avail this repair mortar and bonding agent at a reasonable price in the market. It is widely used in the construction industry. These repair bonding agent is easy to apply. These repair products help in enhancing the bonding and strength of various building materials.

Description:

• Perma Boand-AR is an aqueous emulsion of Acrylic copolymers specially formulated for use with cement.
• Perma Bond-AR modifies the property of cement in mortars and in concrete to make them perform better.

Primary Uses:

• Corrosion protection of steel.
• Repairs of structural members. Repairs of industrial floors.
• Water proofing of basements and tanks by tanking.
• Repairs to marine structures.

Preparation:

• For various applications Perma Bond-AR is used in the form of bonding slurry and as an additive in the modified mortar.

Bonding Slurry:

• It is obtained by mixing one volume of Perma Bond-AR with one and half volume of cement.
• This bonding slurry is applied immediately within twenty minutes of preparation.
  
  

Modified Mortar:

• Mix design
• OPC 50 kgs.
• Zone II sand 150 kgs.
• Perma Bond-AR 10 litres
• Water 8 to 10 litres
• Yield 112 litres

Directions For Use:

• On a cleaned and prepared wet surface apply Perma Bond-AR slurry by brush.
• When the Perma Bond-AR slurry is still green and tacky apply modified mortar and trowel it.
• ­Care should be taken to apply modified mortar fast after application of bonding slurry as the bonding slurry has a tendency to dry out fast in hot weather

Typical Applications:

Corrosion repair of beams, columns and slabs :

• Remove the cover concrete and cut back to the sound concrete zone. Remove all rust from the reinforcement by mechanical means. Apply one coat of "Rust Remover by brush on the steel.
• Apply passivated coat to the reinforcement in the ratio of 1volume Perma Bond-AR to 1volume of cement.
• Next day apply one coat of Perma Bond AR bonding slurry.
• When the bonding slurry is still tacky apply Perma Bond-AR modified mortar to a thickness of 20mm.
• Moisture cure for 24 hours and allow it to dry off.

Properties:

• Perma Bond-AR is available in 500ml, 1ltr, 5ltr, 25Ltr, & 100Ltr. Packing.

We have gained vast expertise in offering a superior range of Repairing Cracks in Plasters to our clients. These are manufactured using qualitative grades of material. It can be used to repair cracks in plastered walls in order to texture surfaces because it has excellent bonding, ease of application, water resistance, aesthetic appearance & durability. We offer this range of product to our esteemed clients at competitive market rates.

We offer an extensive range of Acrylic Repair and Bonding Agent. Acrylic copolymers specially formulated for use with cement. This is basically a type of formulating acrylic co-polymer admixture, which is used with concrete and cementation mortar to enhance the mechanical property including bonding, impact resistance, flexibility, workability and others. We offer the bonding agent as per the specifications given by clients. They are accessed at affordable prices.

An Acrylic Repair And Bonding Agent

Description:

• Perma Boand AR is an aqueous emulsion of Acrylic copolymers specially formulated for use with cement.
• Perma Bond- AR modifies the property of cement in mortars and in concrete to make them perform better.

Description:

• Perma Plaster Mix is a Grey free flowing power which needs only addition of water to form a good consistency mortar.
• Perma plaster Mix is a mortar mix with lot of advantages over conventional mortars.

We manufacture and export quality range of Strength Repair and Bonding Agent that is sure to match the expectations as well as the requirements of our valuable customers. These are useful for high strength structural repairs, concrete, plaster & patch work, bonding cum waterproofing agent. These are available in the market at highly competitive prices. Bonding agent used for concrete and cement mortar for excellent water proofing. It is widely used in the construction industry.

Primary Uses:

• Corrosion protection of steel.

• Floor screed and topping.

• Concrete and floor screed repairs.

• Water proofing and tanking of basements.

• Bonding old concrete to new concrete.

Directions for use:

A) Method:

• Apply passivalar coat of SBR cement slurry.

• On a cleaned and prepared wet surface apply Perma Bond SBR bonding slurry.

• Apply Perma Bond SBR modified mortar by float or trowel to form an uniform smooth surface.

• Bonding slurry sets very fast hence modified mortar application should be fast and immediately after application of bonding slurry.

• Most cure for 24 thousand then allow it to dry off.

B) Preparation: Passival coat/Bond

• Coat Slurry= Cement SBR (1 1)

Note:

• Applied bonding slurry sets very fast. 1 LTR Perma Bond SBR with 1 kg of cement gives a slurry which covers 20 to 25sq./ft

• This mortar cover 2.15 sq./ft. Area if applied to a thickness of 10 mm

Modified Mortar:

Note:

• This Mortar looks very dry. No further addition of SBR or water to be added.

• Dosage of SBR can be varied between 5 5 ltrs to 15 ltrs. Per 50 kg bag of cement depending upon application and severity of problem. 2 ltrs per 50 kg bag of cement is used in general plaster only as an admixture to produce crack free plaster

Typical Applications:

Corrosion Repairs of Beams, Columns and Slabs:

• Remove the cover concrete and cut back to the sound concrete zone.

• Remove all the rust from the reinforcement by mechanical means.

• Apply a passival coat on the cleaned steel and leave it over night.

• Apply one coat of SBR bonding slurry on the reinforcement and the surrounding concrete surface.

• When the bonding slurry is still tacky apply modified mortar by pressing in position using 10 litre SBR per 50 kg bag of cement. Modified mortar can be applied up to a thickness of 20 mm. For building up to higher thickness leave the first layer to dry over night and apply second layer with one more coat of bonding slurry.

Primary Uses:

Perma Latex SBR is a high quality emulsion which enhances the performance of cement mortar and concrete, Some examples from its innumerable uses are as follows :

Micro Concrete

We are leading manufacture of Micro Concrete in India with the brand name of PERMA.

Perma Recrete UW is a cementitious grey powder with micro fine aggregates and glass fibre reinforcements. This product needs only addition of requisite quantity of water to form a thixotropic paste.

It is used for repairing submerged structures such as bridge piers, quay walls and general marine structures.

ADVANTAGES

The product is thixotropic and has anti washout properties hence easy to work within underwater repairs and construction. This property helps the divers with clear visibility of the workmanship and the work can be carried out precisely.
The product develops high early and ultimate strengths which is very important in under water construction and repair works.
Perma Recreate UW is non-shrink and hence does not develop any cracks. This keeps the repaired area strong.
Perma Recrete UW is waterproof hence it protects the reinforcement from corroding.

Description:

• Perma Latex SBR is based on Styrene Butadiene rubber,special adhesive and bonding chemicals along with hydrofluoric agents. Perma Latex SBR gives a versatile performance in many civil engineering, applications The product is a milky white liquid.

Our expertise helps us to manufacture and export qualitative range Water Based Rust Remover. These are manufactured using high quality chemicals at our sophisticated manufacturing unit. These are highly acknowledged due to their accurate composition and effectiveness. These products are sourced from our trustworthy vendors and are available at competitive prices. Our product range is largely used in different sectors for cleaning and removing the rust from the metal surfaces.

Description:

• Perma Rust Remover is an aqueous green liquid which removes the rust and forms a protective cover around the reinforcement and other steel members.
• Perma Rust Remover is just brush applied on the metal surfaces.
• It is an essential pretreatment to the re bars before starting. Perma Bound SBR or Perma Bound-AR treatments. It is also a pretreatment to steel before any epoxy or Polyurethane coating.